Adhesive scanner rails in shopfitting: How well do they hold up in everyday use, and how easy are they to remove during refurbishment?
Removing scanner rails more easily
For shopfitters and shopfitters, the next refurbishment is also a key consideration when fixing scanner rails
How well does the rail hold up in day-to-day use, and how much effort does it take to remove it later and prepare the shelf edge for the next installation?
Whilst stocking the shelves, a cardboard box knocks against the scanner rail. A few months later, the rail needs to be removed again when the shelving is reconfigured. Both situations are part of everyday shop life. That’s why it’s worth bearing in mind the need for future replacement when choosing the adhesive tape. After all, it’s only once the old rail has been removed and the surface prepared for the new one that the actual effort involved becomes apparent.
Digital price labelling is changing the shelf edge
According to RFID News, Carrefour plans to equip all its French hypermarkets with a platform – which includes electronic shelf labels – by the end of 2029. This will enable prices to be updated centrally. When retrofitting, shopfitters and profile manufacturers face the question of whether the electronic labels will fit into the existing mountings or whether new rails will need to be fitted. If a new profile is required, it is worth considering future removal when selecting the fixing method.www.rfidnews.co.uk
What must the adhesive bond be capable of withstanding in day-to-day shelf use?
First, check how the profile fits against the shelf. Does it make contact along its entire length, or do the ends stick out slightly? Does the front of the shelf have an edge or a slight curve? Foam adhesive tape can compensate for slight unevenness. The key factor is how well it adheres to your profile and the shelf surface, and how the fitted rail behaves when you’re stocking the shelves or changing price labels.
How to test fitting and removal on your own shelf
- Use the original material. Take a piece of the designated scanner rail and carry out a test on an inconspicuous area of the shelf surface where you will actually be installing it later. If there are different surface types, it is worth carrying out a separate test for each one.
- Install as shown in the project. Prepare the adhesive surfaces in accordance with the installation instructions. Attach the rail using the specified contact pressure and observe the waiting time indicated for the adhesive tape.
- Re-enact typical handling movements. Insert price labels and replace them. Then check the ends of the profile and the areas where the rail is frequently touched during everyday use in particular.
- Test the removal process. Remove the rail after a test period appropriate to your project. Check the shelf surface for residues and visible changes. Record how much time is required for removal,post-cleaning andpreparation for the next installation.
When comparing two adhesive tapes, use the same profile, the same substrate and the same test conditions. This will enable you to assess both the effort involved in changing them and their hold in everyday use.
When is a single-sided removable foam adhesive tape a suitable option?
If scanner rails need to be removed regularly during product range changes or refurbishments, a single-sided removable foam adhesive tape may be a suitable option. With the double-sidedFIXUM 242P12SL, one side of the adhesive is removable. If the rail is to be removed from the shelf at a later date, this side should face the shelf surface. It is best to test how easily the bond can be broken there and how much cleaning is required using your original rail.
Would you like to try out the mounting on your shelving? Please describe the rail profile, the shelving surface and the planned modification. FIXUM will assist you with selecting the right materials and arrange a sample with you.